Working Instruction, Mechanical
3.10 Keypad
Remove the Chin Cover and microphone gasket as
instructed in section 2.1.10 of the disassembly procedure.
Removal
Use a plectrum to lift a corner of the keypad enough to grip
onto the keypad.
Carefully peel the keypad off the hinge assembly.
Align the tabs and notches on the keypad with the tabs and
holes indicated on the hinge assembly.
Apply pressure over the surface of the keypad so that a
good bond to the hinge assembly occurs.
Reinstall the microphone gasket and chin cover as
instructed in section 4.1.6 of the reassembly procedure.
3/000 21-1/FEA 209 544/603 C
33(71)
©
Sony Ericsson Mobile Communications AB