Hinge Assembly Removal From Rear Frame - Sony Ericsson W580 Working Instruction, Mechanical

Working Instruction, Mechanical

2.1.11 Hinge Assembly Removal from Rear Frame

With the hinge open and the keypad up, locate the metal
clips holding the hinge assembly on the rear frame.
Insert tweezers or a small screwdriver under one of the
metal clips and twist toward the center of the phone to
release the latch.
Insert tweezers or a small screwdriver under the other metal
clip and twist toward the center of the phone to release the
latch.
Lift the "non-keypad" end of the hinge assembly away from
the rear frame.
Use a pry tool to unplug the hinge-to-board connector.
3/000 21-1/FEA 209 544/603 C 21(71)
©
Sony Ericsson Mobile Communications AB