Connecting And Turning On Your New Tv - Toshiba 28Z07B Owner's Manual

Connecting and turning on
To conserve energy it is best to turn your TV off and not to leave it in Standby, unless the timer has been set.
Connect the aerial to the socket on the rear of the television. If you use a Set Top Box and/or a video recorder it is essential that the
aerial cable is connected through the Set Top Box and/or through the video recorder to the television.
DO NOT CONNECT SCART LEADS UNTIL THE TELEVISION IS FULLY TUNED.
Aerial
GREEN = On Timer is set
ORANGE = Bilingual transmission
being received
GREEN = Stereo transmission being received
your new TV
The TV back connections...
K K MAIN (8 ) MAIN (8 )
EXT EXT INT INT
SURROUND SURROUND
K K
(8 (8 ) )
*
SET TOP BOX
Aerial Cable
...and switching your new TV on...
On the front of the TV...
If the red power-on light is unlit, press the POWER button on the front of
the TV to switch the set on and then press a number button on the remote
control to see the screen.
This allows you to put the set into
standby mode when leaving the TV
RED = Power On
unattended for short periods of time. To
return to TV mode press the
or any of the numbered buttons on the
remote control. The picture may take
SETTING UP
COMPONENT COMPONENT
VIDEO INPUT VIDEO INPUT
Y Y
P P /C /C
B B B B
P P /C /C
R R R R
(AUDIO/VIDEO) (AUDIO/VIDEO) (AUDIO/VIDEO) (AUDIO/VIDEO)
Video Recorder
Aerial Cable
...and with the remote control:
Press the Standby Button
i
button,
a few seconds to appear.
6
AUDIO AUDIO
i
:
To conserve energy, do not leave the
set in Standby for long periods of time.