Interface - D-Link NetDefend DFL-210 Cli Reference Manual

3.22. Interface

3.22. Interface
This is a category that groups the following object types.
3.22.1. DefaultInterface
Description
A special interface used to represent internal mechanisms in the system as well as an abstract "any"
interface.
Properties
Name
MTU
Comments
3.22.2. Ethernet
Description
An Ethernet interface represents a logical endpoint for Ethernet traffic.
Properties
Name
IP
Network
DefaultGateway
Broadcast
PrivateIP
NOCHB
Metric
DHCPEnabled
EthernetDevice
AutoSwitchRoute
Specifies a symbolic name for the interface. (Identifier)
Specifies the size (in bytes) of the largest packet that can be passed onward.
(Default: 1500)
Text describing the current object. (Optional)
Specifies a symbolic name for the interface. (Identifier)
The IP address of the interface.
The network of the interface.
The default gateway of the interface. (Optional)
The broadcast address of the connected network. (Optional)
The private IP address of this high availability node.
(Optional)
This will disable sending Cluster Heartbeats from this inter-
face (used by HA to detect if a node is online and working).
(Optional)
Specifies the metric for the auto-created route. (Default: 100)
Specifies that DHCP should be enabled on this interface.
(Default: No)
Hardware settings for the Ethernet interface.
Enable transparent mode, which means that a switch route is
added automatically for this interface. (Default: No)
Chapter 3. Configuration Reference
88