D-Link NetDefend DFL-210 Cli Reference Manual page 49

2.2.37. pipes
ospf -lsa <lsaID> [-process=<OSPF router process>]
Show details for a specified LSA.
ospf -snoop={ON | OFF} [-process=<OSPF router process>]
Show troubleshooting messages on the console.
ospf -ifacedown <interface> [-process=<OSPF router process>]
Take specified interface offline.
ospf -ifaceup <interface> [-process=<OSPF router process>]
Take specified interface online.
ospf -execute={STOP | START | RESTART}
[-process=<OSPF router process>]
Start/stop/restart OSPF process.
Options
-area
-database
-execute={STOP | START | RE-
START}
-iface
-ifacedown
-ifaceup
-lsa
-neighbor
-process=<OSPF router process>
-route
-snoop={ON | OFF}
-verbose
<interface>
<interface>
<lsaID>
<OSPF area>
<OSPF neighbor>
{HA | ALT}
Show area information.
Show the LSA database.
Start/stop/restart OSPF process. (Admin only)
Show interface information.
Take specified interface offline. (Admin only)
Take specified interface online. (Admin only)
Show details for a specified LSA <lsaID>.
Show neighbor information.
Required if there are >1 OSPF router processes.
Show the internal OSPF process routingtable.
Show troubleshooting messages on the console.
Increase amount of information to display.
OSPF enabled interface.
OSPF enabled interface.
LSA ID.
OSPF Area.
Neighbor.
Show HA routingtable.
39
Chapter 2. Command Reference