Utility - D-Link NetDefend DFL-210 Cli Reference Manual

Network security firewall
Hide thumbs Also See for NetDefend DFL-210:
Table of Contents

Advertisement

2.3. Utility

2.3. Utility
2.3.1. ping
Ping host.
Description
Sends one or more ICMP ECHO datagrams to the specified IP address of a host. All datagrams are
sent preloaded-style (all at once).
The data size -length given is the ICMP data size. 1472 bytes of ICMP data results in a
1500-byte IP datagram (1514 bytes ethernet).
Usage
ping <host> [-recvif=<interface>] [-srcip=<ip address>]
[-pbr=<table>] [-count=<1...10>] [-length=<Integer>]
[-verbose]
Options
-count=<1...10>
-length=<Integer>
-pbr=<table>
-recvif=<interface>
-srcip=<ip address>
-verbose
<host>
Number of packets to send. (Default: 1)
Packet size. (Default: 4)
Route using PBR Table.
Pass packet through the rule set, simulating that the packet was re-
ceived by <recvif>.
Use this source IP.
Verbose (more information).
IP address of host to ping.
50
Chapter 2. Command Reference

Advertisement

Table of Contents
loading

Table of Contents