Block Hosts - D-Link NetDefend DFL-210 Cli Reference Manual

2.2.6. blacklist
Description
Block and unblock hosts on the black and white list.
Note: Static blacklist hosts cannot be unblocked.
If -force is not specified, only the exact host with the service, protocol/port and destiny specified
is unblocked.
Example 2.8. Block hosts
blacklist -show -black -listtime -info
blacklist -block 100.100.100.0/24 -serv=FTP -dest=50.50.50.1 -time=6000
Usage
blacklist -show [-creationtime] [-dynamic] [-listtime] [-info]
Show information about the blacklisted hosts.
blacklist -block <host> [-serv=<service>] [-prot={TCP | UDP | ICMP
Block specified netobject.
blacklist -unblock <host> [-serv=<service>] [-prot={TCP | UDP |
Unblock specified netobject.
Options
-all
-black
-block
-creationtime
-dest=<ip address>
-dynamic
-force
-info
-listtime
-port=<port number>
[-black] [-white] [-all]
| OTHER | TCPUDP | ALL}] [-port=<port number>]
[-dest=<ip address>] [-time=<seconds>]
ICMP | OTHER | TCPUDP | ALL}] [-port=<port number>]
[-dest=<ip address>] [-time=<seconds>] [-force]
Show all the information.
Show blacklist hosts only.
Block specified netobject. (Admin only)
Show creation time.
Destination address to block/unblock (ExceptExtablished flag
is set on).
Show dynamic hosts only.
Unblock all services for the host that matches to options.
Show detailed information.
Show time in list (for dynamic hosts).
Number of the port to block/unblock.
23
Chapter 2. Command Reference