Piperule - D-Link NetDefend DFL-210 Cli Reference Manual

3.31. PipeRule

3.31. PipeRule
Description
A Pipe Rule determines traffic shaping policy - which Pipes to use - for one or more types of traffic
with the same granularity as the standard ruleset.
Properties
Index
Name
SourceInterface
SourceNetwork
DestinationInterface
DestinationNetwork
Service
Schedule
ForwardChain
ReturnChain
Precedence
FixedPrecedence
Comments
The index of the object, starting at 1. (Identifier)
Specifies a symbolic name for the object. (Optional)
Specifies the name of the receiving interface to be compared to
the received packet.
Specifies the sender span of IP addresses to be compared to the re-
ceived packet.
Specifies the the destination interface to be compared to the re-
ceived packet.
Specifies the span of IP addresses to be compared to the destina-
tion IP of the received packet.
Specifies a service that will be used as a filter parameter when
matching traffic with this rule.
By adding a schedule to a rule, the security gateway will only al-
low that rule to trigger at those designated times. (Optional)
Specifies one or more pipes to be used for forward traffic.
(Optional)
Specifies one or more pipes to be used for return traffic.
(Optional)
Specifies what precedence should be assigned to the packets be-
fore sent into a pipe. (Default: MapIPDSCP)
Specifies the fixed precedence.
Text describing the current object. (Optional)
Note
If no Index is specified when creating an instance of this type, the object will be
placed last in the list and the Index will be equal to the length of the list.
Chapter 3. Configuration Reference
112