Datetime - D-Link NetDefend DFL-210 Cli Reference Manual

3.9. DateTime

3.9. DateTime
Description
Set the date, time and time zone information for this system.
Properties
TimeZone
DSTEnabled
DSTOffset
DSTStartMonth
DSTStartDay
DSTEndMonth
DSTEndDay
TimeSynchronization
TimeSyncServerType
TimeSyncServer1
TimeSyncServer2
TimeSyncServer3
TimeSyncInterval
TimeSyncMaxAdjust
TimeSyncGroupIntervalSize
Comments
Note
This object type does not have am identifier and is identified by the name of the type
only. There can only be one instance of this type.
Specifies the time zone. (Default: GMT)
Enable daylight saving time. (Default: Yes)
Daylight saving time offset in minutes. (Default: 60)
What month daylight saving time starts. (Default: April)
What day of month daylight saving time starts. (Default: 1)
What month daylight saving time ends. (Default: October)
What day of month daylight saving time ends. (Default: 1)
Enable time synchronization. (Default: Disable)
Type of server for time synchronization, UDPTime or SNTP
(Simple Network Time Protocol). (Default: SNTP)
DNS hostname or IP Address of Timeserver 1.
DNS hostname or IP Address of Timeserver 2. (Optional)
DNS hostname or IP Address of Timeserver 3. (Optional)
Seconds between each resynchronization. (Default: 86400)
Maximum time drift in seconds that a server is allowed to ad-
just. (Default: 600)
Interval according to which server responses will be grouped.
(Default: 10)
Text describing the current object. (Optional)
70
Chapter 3. Configuration Reference