Idprule - D-Link NetDefend DFL-210 Cli Reference Manual

3.20. IDPRule

3.20. IDPRule
Description
An IDP Rule defines a filter for matching specific network traffic. When the filter criteria is met, the
IDP Rule Actions are evaluated and possible actions taken.
Properties
Index
Name
SourceInterface
SourceNetwork
DestinationInterface
DestinationNetwork
Service
Schedule
AlwaysInspect
Comments
3.20.1. IDPRuleAction
Description
An IDP Rule Action specifies what signatures to search for in the network traffic, and what action to
take if those signatures are found.
Properties
Index
Action
The index of the object, starting at 1. (Identifier)
Specifies a symbolic name for the rule. (Optional)
Specifies the name of the receiving interface to be compared to
the received packet.
Specifies the sender span of IP addresses to be compared to the re-
ceived packet.
Specifies the the destination interface to be compared to the re-
ceived packet.
Specifies the span of IP addresses to be compared to the destina-
tion IP of the received packet.
Specifies a service that will be used as a filter parameter when
matching traffic with this rule.
By adding a schedule to a rule, the security gateway will only al-
low that rule to trigger at those designated times. (Optional)
Enable to also inspect dropped packets. (Default: No)
Text describing the current object. (Optional)
Note
If no Index is specified when creating an instance of this type, the object will be
placed last in the list and the Index will be equal to the length of the list.
The index of the object, starting at 1. (Identifier)
Specifies what action to take if the given signature is found.
(Default: Audit)
85
Chapter 3. Configuration Reference