D-Link NetDefend DFL-210 Cli Reference Manual page 153

3.43. UserAuthRule
SessionTimeout
UseServerTimeouts
MultipleUsernameLogins
ReplaceIdleTime
AccountingServers
BytesSent
PacketsSent
BytesReceived
PacketsReceived
SessionTime
SupportInterimAccounting
ServerInterimControl
InterimValue
LogEnabled
LogSeverity
Comments
Note
If no Index is specified when creating an instance of this type, the object will be
placed last in the list and the Index will be equal to the length of the list.
If a user has successfully been authenticated, he/she will auto-
matically be logged out after this many seconds, regardless of
if there has been activity from the user or not. (Optional)
Use timeouts received from the authentication server. If no
values are received, the manually specified values will be
used. (Default: No)
Specifies how multiple username logins will be handled.
(Default: AllowMultiple)
Replace existing user if idle for more than this number of
seconds. (Default: 10)
Specifies the accounting servers that will be used to report
user usage matching this rule. (Optional)
Enable reporting of the number of bytes sent by the user.
(Default: Yes)
Enable reporting of the number of packets sent by the user.
(Default: Yes)
Enable reporting of the number of bytes received by the user.
(Default: Yes)
Enable reporting of the number of packets received by the
user. (Default: Yes)
Enable reporting of the number of seconds the session lasted.
(Default: Yes)
Enable Interim Accounting Messages to update the account-
ing server with the current status of an authenticated user.
(Default: No)
Let the RADIUS server determine the interval that interim ac-
counting events should be sent. (Default: Yes)
The interval in seconds in which interim accounting events
should be sent. (Default: 600)
Enable logging. (Default: No)
Specifies with what severity log events will be sent to the spe-
cified log receivers. (Default: Default)
Text describing the current object. (Optional)
143
Chapter 3. Configuration Reference