Shure ULX
Wireless Microphone System User Manual page 13

4. Press the SET button to advance to the desired Channel number, as shown in Figure 27.
5. To reverse the direction of the Group or Channel search, hold down the SET button and press the MODE button. See
Figure 28 .
6. Press the MODE button again to select the new Channel setting. "FrCh" will appear briefly on the display, indicating
that the frequency has changed. Then the new Group and Channel settings will appear. Refer to Figure 29.
7. Make sure the transmitter Group and Channel settings match the receiver Group and Channel settings, as shown in
Figure 30. If using the Bodypack transmitter, clip it to your belt, waistband, or guitar strap.
THE TRANSMITTER IS NOW READY TO USE. FOR MULTIPLE SYSTEM INSTALLATIONS,
LEAVE THE TRANSMITTER ON, RETURN TO THE "BASIC RECEIVER PROGRAMMING," AND
REPEAT THE SETUP PROCEDURE FOR EACH SYSTEM.
13
FIGURE 27
FIGURE 28
FIGURE 29
ULXS4
FIGURE 30
ULXP4