Table of Contents
Advertisement
TRANSMITTER SETUP
Transmitter Battery Installation
Open the battery cover and insert a fresh 9V alkaline or lithium battery, as shown in Figure 20.
Ñ
ULX1 Bodypack Connections
If you are using a Bodypack system with a Shure lavalier microphone or instrument adapter, plug the microphone cable or
instrument adapter cable into the transmitter input connector, as shown in Figure 21.
NOTE: The wiring of the input connector on the transmitter is designed for Shure microphones.
Turning the Transmitter On
NOTE: DO NOT turn on the transmitter before powering up the receiver. Once the receiver has located an open
frequency, turn the transmitter on and set it to that receiver frequency. Turning the transmitter on first will interfere
with the receiver's frequency scanning function.
Slide the transmitter ON/OFF switch to the ON position, as shown in Figure 22. The power LED will momentarily glow red,
then change to a steady green. The default frequency setting (Channel 1, Group 1) will appear on the display.
Ñ
FIGURE 20
FIGURE 21
FIGURE 22
11
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the ULX Wireless Microphone System and is the answer not in the manual?
Questions and answers