Sailor 6215 VHF DSC User & Installation Manual page 83

Replacing the fuse in the red wire (Power +)
One fuse is installed in the supplied
DC cable. If the fuse is blown, track
down why the fuse was blown and
solve the problem. To replace the
fuse, do as follows:
1. Hold both ends of the fuse holder
and pull it apart.
2. Take out the old fuse.
3. Insert the new fuse. The fuse
rating is 10 A T.
4. Make sure that the fuse is tightly
fixed on the metal contact inside
the fuse holder.
5. Put together the fuse holder.
Chapter 4: Service & maintenance
1
2
3
Maintenance 73