Cable Inspection And Lubrication - KYMCO MX 125 Service Manual

3
. INSPECTION/ADJUSTMENT
Turn out: Slack is decreased.
Turn in: Slack is increased.
Tighten four bolts attaching rear axle hub to
the specification. While pushing up or down
on the chain to zero slack.
Torque: 6.0 8.0kgf-m
Tighten the adjuster.
Torque: 1.8 2.5kgf-m
3-15
Adjuster
CABLE INSPECTION AND
LUBRICATION
Damaged cable sheath may cause
corrosion and interfere with the cable
movement. An unsafe condition may
result so replace such cable as soon as
possible.
MX'er SYSTEM
Bolts
Adjuster