7
. CYLINDER HEAD/VALVES
SERVICE INFORMATION
GENERAL INSTRUCTIONS
• The cylinder head can be serviced with the engine installed in the frame.
• When assembling, apply molybdenum disulfide grease or engine oil to the valve guide movable
parts, valve arm and camshaft sliding surfaces for initial lubrication.
• The camshaft is lubricated by engine oil through the cylinder head engine oil passages. Clean and
unclog the oil passages before assembling the cylinder head.
• After disassembly, clean the removed parts and dry them with compressed air before inspection.
• After removal, mark and arrange the removed parts in order.
the reverse order of removal.
SPECIFICATIONS
Item
Valve clearance (cold)
Cylinder head compression pressure
Cylinder head warpage
Camshaft cam height
Valve rocker arm to shaft clearance
Valve stem-to-guide
clearance
Valve spring free length
Valve spring
compressed force
Valve spring tilt
Standard (mm)
IN
0.06
EX
0.06
16kg/cm²
⎯
IN
31.8
EX
31.53
0.09 0.034
IN
0.010 0.037
EX
0.025 0.052
IN
39.4
EX
45.5
IN
7.7 8.9kg(at 33.7mm)
EX
19.5 22.5kg(at 38.4mm)
IN
1.7
EX
1.95
MX'er SYSTEM
When assembling, install them in
Service Limit (mm)
⎯
⎯
0.05
31.4
31.13
0.1
0.06
0.08
⎯
⎯
⎯
⎯
⎯
⎯
7-2