12
. FRONT WHEEL/FRONT BRAKE/FRONT
SUSPENSION/STEERING SYSTEM
• Be sure the upper handlebar holder
mark face to front.
• Fist tighten the bolts on the front side
of the handlebar holder, and then
tighten the bolts on the rear side.
Apply the grease onto the end of the throttle
cable and end of the brake cable.
Refer to the "TOE-IN ADJUSTMENT"
section in the CHAPTER 3 to adjust toe-in.
Refer to the "FRONT BRAKE
ADJUSTMENT" section in the CHAPTER
3 to adjust front brake.
Refer to the "REAR BRAKE
ADJUSTMENT" section in the CHAPTER
3 to adjust rear brake.
12-19
MX'er SYSTEM