Start Here; Prolinx Reference Guide; Install Prosoft Configuration Builder Software - ProSoft Technology ProLinx S3964R Driver Manual

Start Here

Driver Manual
1 Start Here
In This Chapter

ProLinx Reference Guide ........................................................................9

Install ProSoft Configuration Builder Software......................................... 9

For most applications, the installation and configuration steps described in this
section will work without additional programming. ProSoft Technology strongly
recommends that you complete the steps in this chapter before developing a
custom application.
1.1 ProLinx Reference Guide
The ProLinx Reference Guide on the ProSoft Solutions CD-ROM provides
detailed information on the entire range of ProLinx modules. If you have any
questions that are not answered in the S3964R Driver Manual, please refer to the
ProLinx Reference Guide.
1.2 Install ProSoft Configuration Builder Software
You must install the ProSoft Configuration Builder (PCB) software in order to
configure the S3964R. You can always get the newest version of ProSoft
Configuration Builder from the ProSoft Technology web site.
To install ProSoft Configuration Builder from the ProSoft Web Site
1 Open your web browser and navigate to http://www.prosoft-
technology.com/pcb
2 Click the D
Configuration Builder.
3 Choose "S
4 Save the file to your Desktop, so that you can find it easily when you have
finished downloading.
5 When the download is complete, locate and open the file, and then follow the
instructions on your screen to install the program.
If you do not have access to the Internet, you can install ProSoft Configuration
Builder from the ProSoft Solutions CD-ROM, included in the package with your
S3964R.
ProSoft Technology, Inc.
April 14, 2009
H link to download the latest version of ProSoft
OWNLOAD ERE
" or "S F " when prompted.
AVE AVE ILE
S3964R ♦ ProLinx Gateway
Siemens 3964R Protocol
Page 9 of 64