PCE Health and Fitness BT 200 Manual page 6

8. Balance preparation for work
11
12
10
6
4
7
9
1
2
1. Remove balance and power supply unit from
the package.
2. Place the balance on stable foundation, in place
8
not subjected to mechanical vibrations and air
movements.
3. Unscrew protection rod 10 and take it out with
protection cap 11 (if it appears in scale). Into the
5 same place push decorating button 12.
4. Adjust the balance level, using the rotary legs,
so the air bubble in the level 7 located in rear part
of balance, takes the central position.
5. Connect together walls edges of pan cover 8.
6. Put pan cover on balance and cover the lid 9.
info@tursdaletechnicalservices.co.uk
+33°C
+18°C
6