PCE Health and Fitness BT 200 Manual page 10

Standard transmission parameters: 8bits, 1stop, no parity, 4800bps. To change transmission parameters
use "rS-232" function (see further part of the manual).
Data transmission protocol description (Long protocol)
Computer→Balance: initialising signal S I CR LF (53h 49h 0Dh 0Ah)
Balance→Computer: balance indication in the following format (16Bytes)
Byte 1
Byte 2, 11 and 14
Byte
3÷4
Byte 5÷9
Byte 10
Byte 12
Byte 13
Byte 15
Byte 16
Connection cable WK-1 (balance – computer / 9-pin):
BALANS
Connection cable WD-1 (balance - KAFKA printer):
BALANCE
KAFKA printer internal switches set-up:
SW-1 SW-2
on off
- sign or space
- space
- digit or space
- digit, decimal point or space
- digit
- k, l, c, p or space
- g, b, t, c or %
- CR (0Dh)
- LF (0Ah)
SW-3 SW-4 SW-5
on off off
COMPUTER
PRINTER
SW-6 SW-7 SW-8
on off off
info@tursdaletechnicalservices.co.uk
10