Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for PCE Health and Fitness PCE-ABT 220L
Summary of Contents for PCE Health and Fitness PCE-ABT 220L
- Page 1 User Manual PCE-ABT 220L Analytical Balance User manuals in various languages (français, italiano, español, português, nederlands, türk, polski, русский, 中文) can be found by using our product search on: www.pce-instruments.com Last change: 8 October 2020 v1.0 © PCE Instruments...
-
Page 2: Table Of Contents
Contents Safety notes ................... 1 Specifications ..................2 Delivery scope ..................2 Commissioning ..................2 Unpacking ........................2 Structure .......................... 2 Levelling ........................... 2 Placement ....................3 Control panel ..................3 Calibration of the balance ..............4 Settings ....................4 Sensitivity ......................... -
Page 3: Safety Notes
Safety notes Please read this manual carefully and completely before you use the device for the first time. The device may only be used by qualified personnel and repaired by PCE Instruments personnel. Damage or injuries caused by non-observance of the manual are excluded from our liability and not covered by our warranty. -
Page 4: Specifications
10 ... 40 °C Dimensions 340 x 215 x 350 mm Weight 7.5 kg Delivery scope 1 x analytical balance PCE-ABT 220L 1 x fabric gloves 1 x test weight 1 x cold-device cable 1 x user manual Commissioning Unpacking Remove the balance from the packaging by carefully lifting it out of the box. -
Page 5: Placement
Placement • The balance should not be positioned in a place that could have a negative effect on accuracy. • Avoid extreme temperatures. Do not set up the balance in direct sunlight. • Avoid uneven tables. The table or floor must be fixed and must not vibrate. •... -
Page 6: Calibration Of The Balance
Calibration of the balance If the analytical balance PCE-ABT 220L is inaccurate, it must be calibrated. Follow these steps: • Position the balance on a stable, vibration-free surface. In addition, the balance must remain stationary for one hour to allow it to adjust to the ambient temperature. -
Page 7: Measuring Rate
Measuring rate With the power on, press ON until the word "Speed" appears on the display. Press TARE to access the setting options. Press the ON key to change the setting: Highest speed High speed Normal speed Low speed Press TARE to save the setting. ©... -
Page 8: Setting The Unit
Setting the unit With the power on, press ON until the word "Unit" appears on the display. Press TARE to access the setting options. Press the ON key to change the setting. Press TARE to save the setting. © PCE Instruments... -
Page 9: Counting Function
Counting function The analytical balance has a counting function. Please make sure that the objects have the same weight and have a minimum weight of 0.5 mg. The counting function is performed as follows: Press the ON key until "COU" is displayed. 2. -
Page 10: Troubleshooting
Troubleshooting If an error occurs, you can use the following chart to correct the error. ERROR CAUSE SOLUTION Nothing is - Not connected to the power supply - Connect the unit displayed - The fuse is defective the power supply - Adaptor damaged - Replace the fuse - Replace the adaptor... -
Page 11: Warranty
Warranty You can read our warranty terms in our General Business Terms which you can find here: https://www.pce-instruments.com/english/terms. Disposal For the disposal of batteries in the EU, the 2006/66/EC directive of the European Parliament applies. Due to the contained pollutants, batteries must not be disposed of as household waste. They must be given to collection points designed for that purpose. - Page 12 PCE Instruments contact information Germany France Spain PCE Deutschland GmbH PCE Instruments France EURL PCE Ibérica S.L. Im Langel 4 23, rue de Strasbourg Calle Mayor, 53 D-59872 Meschede 67250 Soultz-Sous-Forets 02500 Tobarra (Albacete) Deutschland France España Tel.: +49 (0) 2903 976 99 0 Téléphone: +33 (0) 972 3537 17 Tel.