PCE Health and Fitness BT 200 Manual page 13

15.2 Pieces counting function (PCS)
5
12
12.05 g
T
0.00 g
23.04 g
MENU
PCS
T
PCS oFF
PCS on
T
5
T
0 pcs
12 pc s
That function allows for counting the identical details,
e.g. tablets or buttons, contained in the weighed
batch.
The measurement takes place in two phases:
- first phase – calculation of single detail weight upon
the basis of sample of specified number of pieces 5,
10, 20, 50, 100, 200, or 500 detils,
- second phase – counting the details in the weighed
batch.
Functions has the following options:
- PCS OFF – function deactivation,
- PCS on – start preparation of recipes
- PCS ... – use the last written unitary mass.
- PCS 5, 10, 20, 50, ect – number of pieces in a batch
- PCS SEt – write free number of pices in a batch
- PCS MJ – direct write a unitary mass
- out – exit without saving
Notes:
1. It is recommended, that the single detail weight is
higher than the balance reading graduation, and the
weight of sample, used in the first phase is higher
than 100 of reading graduations.
2. Err-PCS massage indicates that pan is empty or
when the single detail weight is lower than one
reading graduation (user may calculate the pieces,
keeping in mind, that it increases the error).
info@tursdaletechnicalservices.co.uk
13