Miele Built-in coffee machine Operating And Installation Instructions page 81

Tip: We recommend providing a place
to sit the coffee machine which is the
same height as the building-in niche.
This will make it easier to connect the
machine to the electricity supply.
^ Using the large allen key, unscrew all
four feet out by about 2 mm.
The feet can be unscrewed by up to
approx. 10 mm.
^ Connect the appliance to the
electricity supply.
^ Push the coffee machine all the way
into the building-in niche.
Ensure the mains connection cable
doesn't get damaged when pushing
the appliance into the niche.
^ Check the height to make sure the
coffee machine is sitting centrally in
the unit and that it is level. If this is
not the case, realign the 4 feet
underneath the machine using the
large allen key.
The appliance comes with four M5
socket screws to help you align and
secure it in the building-in niche.
^ Open the appliance door, and
partially tighten the side socket
screws.
^ Carefully turn the lower socket
screws to centre the machine in the
niche.
^ Tighten both upper socket screws by
hand to secure the machine in the
unit. Do not overtighten them.
Installation
81