Miele Built-in coffee machine Operating And Installation Instructions page 49

Danger of burning!
Always allow the machine to cool
down before cleaning. Please be
aware that the water in the drip tray
will be hot.
Do not clean the machine with a
steam cleaner as this will damage
the machine.
Do not use cleaners containing
chlorides, acids, soda or scouring
agents. These would damage the
surface.
It is important to clean the machine
regularly, as the used coffee grounds
can soon go mouldy. Milk residue
spoils and the milk pipework becomes
blocked.
The seal on the central spout
connector is lubricated with silicone
grease. Try to avoid getting this
grease on your clothing when
removing and inserting containers or
other components.
Cleaning and care
All surfaces of this appliance are all
susceptible to scratching. Scratches
on glass surfaces could even cause
a breakage.
Contact with unsuitable cleaning
agents can cause discolouration on
all surfaces.
Wipe up any spillages or splashes
of descaling agent immediately.
Avoid the following on all types of
front:
– Cleaning agents containing soda,
ammonia, acids or chlorides
– Solvent-based cleaning agents
– Cleaning agents containing
descaling agents
– Stainless steel cleaners
– Dishwasher cleaner
– Oven cleaner
– Abrasive cleaning agents, e.g.
powder cleaners and cream cleaners
– Hard, abrasive sponges, e.g. pot
scourers, brushes or sponges which
have been previously used with
abrasive cleaning agents
– Dirt erasers
– Sharp metal scrapers
49