Preparing Drinks With Milk; Preparing Hot Water; Preparing User Profile Drinks; After A Drink Has Been Prepared - Miele Built-in coffee machine Operating And Installation Instructions

Making drinks

Preparing drinks with milk

^ Place a suitable vessel underneath
the central spout.
^ Touch the sensor for the desired
drink:
H
Cappuccino
k
Latte macchiato
x
In "Further programmes":
Caffè latte, hot milk, milk froth
The coffee machine will now prepare
the desired drink.

Preparing hot water

,
Danger of burning and scalding
on the hot water spout. The water
dispensed is very hot.
Please note that the water prepared
by the machine is not boiling and is
therefore not suitable for preparing
tea.
^ Place a suitable vessel underneath
the hot water spout.
^ Touch X.
^ Use the arrow sensors to highlight
"Hot water". Touch the OK sensor.
Hot water will be dispensed into the
vessel under the hot water spout.
To cancel preparation:
^ Touch the OK sensor.
Preparation will be cancelled.
30

Preparing User profile drinks

If you have set the machine up for a
specific User profile, you must first
select the User profile required and
then the type of drink.
^ Touch {.
^ Touch "Select profile".
^ Use the arrow sensors to highlight
the required profile. Touch the OK
sensor.
The name of the User profile will appear
in the display to show that a profile has
been selected.
You can now prepare the drink you
want.
After a drink has been
prepared
"Start the rinsing programme" appears
in the display a few minutes after a
drink with milk has been prepared.
^ Touch the OK sensor.
The milk pipework will now be cleaned.
Even if you do not touch the OK
sensor, the milk pipework will
automatically be rinsed after some
time.