Miele Built-in coffee machine Operating And Installation Instructions page 66

Problem solving guide
Message
"Too much
ground coffee"
"Push the water
container in until it
engages"
66
Possible cause and remedy
There is too much ready ground coffee in the ground coffee
chute.
If more than one level scoop of ground coffee is added to the
coffee chute, the brew unit cannot process the coffee. The
ground coffee will be directed into the waste container and
the fault message will appear in the display.
^ Switch the machine off with the On/Off K sensor.
^ Remove and clean the brew unit (see "Cleaning and care
–Brew unit").
^ Remove the ground coffee inside the coffee machine, e.g.
with a vacuum cleaner.
^ Use the coffee spoon supplied to add ground coffee to the
ground coffee chute. Add only one portion of ground
coffee to the chute.
The water container is not in the correct position.
^ Remove the water container and push it back in again.
This fault message also appears if the water container was
not correctly filled or fitted for descaling.
^ Fill the water container to the descaling symbol F and
restart the descaling programme.