Table of Contents
Advertisement
Please follow the installation steps below to ensure your appliance operates correctly.
Power
The appliance must be installed so the plug is accessible.
●
●
To ensure that the appliance is not accidentally switched off, connect your refrigerator
●
●
to its own power point. Do not plug in any other appliance at this power point or use
extension cords and double adaptors, as the combined weight of both power cords can
pull the double adaptor from a wall outlet socket.
For power requirements, refer to the information on the serial plate located on the left
●
●
hand side of the fridge compartment.
It is essential that the appliance is properly grounded (earthed).
●
●
Connect the appliance to the electrical supply (220-240 V~50 Hz) with the plug and lead,
●
●
which are fitted.
Connections to the mains supply should be in accordance with local regulations.
●
●
Location
Your refrigerator should not be located in direct sunlight or next to any heat generating
●
●
appliance such as a cooktop, oven or dishwasher.
This appliance is intended to be used in household and similar applications such as
●
●
– staff kitchen areas in shops, offices and other working environments;
– farm houses and by clients in hotels, motels and other residential type environments;
– bed and breakfast type environments;
– catering and similar non-retail applications.
Ice & water (Ice & water models only)
Your Ice & Water refrigerator must be installed by an authorised plumber or
●
●
Fisher & Paykel Authorised Repairer as incorrect plumbing can lead to water leaks.
Fisher & Paykel Appliances does not accept responsibility for damage (including water
●
●
damage) caused by faulty installation or plumbing.
6
INSTALLATION INSTRUCTIONS
Hide quick links:
Advertisement
Table of Contents
