Fisher & Paykel RX611DUX Installation Instructions And User Manual page 12

The fridge door
1 Undo the hinge cover screw and remove the cover (Fig. 5), the clips holding the cover
must be released first. Unclip the front section of the hinge cover, then push the cover
towards the centre of the appliance and pull upwards to release.
2 Undo screws holding down the hinge bracket (Fig. 6).
3 Pull the door up and then away from the cabinet.
Fig. 5 Removing hinge cover
Refitting the doors
Refit the doors by reversing the removal steps. It is essential that when you replace the
freezer door you replace the earth wire.
10
INSTALLATION INSTRUCTIONS
Hinge cover
Fig. 6 Removing hinge screws