Table of Contents
Advertisement
Removing and installing the doors
ImpORTANT!
In the event that you need to remove the refrigerator doors, please follow the door
●
●
removal and installation instructions below.
It is suggested for your safety to have two or more people to assist you in completing
●
●
the tasks below to avoid injury, product damage or property loss.
Ensure both power and water to the refrigerator are turned off.
●
●
First step to removing fridge and freezer door
1 Undo the 2 screws holding kick-strip in position and remove (Fig.1).
2 Release the water coupler: press and hold in the collet as shown (Fig.2) and remove the
water tube.
Fig. 1 Removing kick-strip
The freezer door
1 Undo the hinge cover screw and remove the cover (Fig.3), the clips holding the cover
must be released first. Unclip the front section of the hinge cover, then push the cover
towards the centre of the appliance and pull upwards to release.
2 Disconnect wires held together with clips (Fig.3).
3 Undo the screws holding down hinge bracket. Do not disconnect the earth wire from the
screw (Fig.4).
4 Lift freezer door and thread the water tube up through the lower hinge.
5 Pull the door up and then away from the cabinet.
Hinge cover
Fig. 3 Removing hinge cover
INSTALLATION INSTRUCTIONS
Kick-strip
(Doors omitted for clarity)
Fig. 2 Releasing water coupler
Fig. 4 Removing hinge screws
9
Hide quick links:
Advertisement
Table of Contents
