Hitachi RU-3400JY/VR S10 Operating Instructions Manual page 25

Item
Function
no.
AUTO WHITE
６
AUTO BLACK
７
８ Curtail auto
setup
CAM NO.
９
Scene file
１ ０
selection
Switch
・Pickup a white scene and press the
AUTO WHITE
・At white balance, the
・Press the
AUTO BLACK
automatically adjust the black balance.
・At black balance, the
・Press the
BREAK OFF
・Camera number is shown.
CAM NO.
・Start the camera menu to set the camera
- SCENE FILE - ・There are 9 scene files to 0-8 including 0 file.
・Press scene file to access a scene file.
1
2
・Press the switch while the LED is lit.
3
4
5-8
･ When the all LED light turns off , scene file 0
･ To select scene files 5 – 8 ,
・Press the SCENE PRESET until blink stops, pre-set data
SCENE PRESET
Operating procedure
for automatic white balance
AUTO WHITE
adjustment.
LED flashes for several seconds and
the buzzer sounds.
AUTO BLACK
LED flashes for several seconds and
the buzzer sounds.
BREAK OFF
break off the auto setup process.
number.
The LED lights.
The LED extinguishes when the scene file
is deselected.
is chosen.
set switches
5-8
switches –
1 4
is loaded.
Press the SCENE PRESET again until blink stop
the scene file data is loaded again.
13
AUTO WHITE
to cut off the light and
AUTO BLACK
during auto setup to
to on, then press