Hitachi RU-3400JY/VR S10 Operating Instructions Manual page 42

Item
Function
no.
１７ Gain and black
adjust
G.gain/C.temp
adjust
Detail adjustment
１８
Iris adjustment
１９
Auto iris on/off
Iris F value
２０
indication
Master black
２１
adjust
Switch
・Gain and black adjustment with
PAINT ENABLE
PAINT ENABLE
-GAIN-
・Setting
pedestal control to center detent position.
-BLACK-
Set to C.Temp to operate the G.Gain control as
G.GAIN/C.TEMP
follows.
Turn clockwise to raise blue and lower red gain.
Turn counter-clockwise raise red and lower blue gain.
When switch is set to G.Gain:
Turn clockwise to simultaneously lower red and blue
gain.
Turn counter-clockwise to simultaneously raise red and
blue gain.
・Detail level can be adjusted by turning the
-DTL-
control.
・Iris adjustment. When using joystick ,operate by
-IRIS-
up and down movement.
・During auto iris, joystick up&down or manual iris
trimmer control can be used for fine adjustment.
・Auto iris on/off is selected.
AUTO IRIS
Set as below according to camera usage
mode.
IRIS
(1) Normal use
･
(2)
(3)
-MASTER BLACK- ・Master black can be adjusted by the mounted
master control knob for JY type.
・ Master black can be adjusted by Variable
Register for VR type.
Operating procedure
switch on
Adjustable by control
PAINT ENABLE
Lens F value is indicated.
–
1.4 22 CL
Camera power supply off
00
The lens cable is open
oo
30
to off returns