Assembly Instructions - Kärcher HD 2.5 / 24 P Operator's Manual

STEP 1:
Attach the handle to the frame of the
pressure washer. Align holes, insert
bolts, and tighten with knobs.
STEP 2:
Mount the gun/hose storage handle.
STEP 3:
Place the quick connect nozzles in
the nozzle holder.
STEP 4:
Attach the wand to the trigger gun.
6
English

ASSEMBLY INSTRUCTIONS

STEP 5:
Pull the spring-loaded collar of the
wand back to insert your choice of
quick connect nozzle.
STEP 6:
Release the collar and push the noz-
zle until the collar clicks.
WARNING
High pressure in nozzle area.
Risk of injury caused by improperly
locked nozzle.
Make sure you hear a 'click' when in-
serting the nozzle tip into the wand.
Pull the nozzle to make sure it is
seated properly before operating
your unit.
STEP 7:
Attach the high pressure hose to the
trigger gun.