Toshiba e-studio 5520c Quick Start Manual page 19

17.
[ACCESS] button
Use this button when the department code or user
information has been set. If this button is pressed after
copying, etc., the next user cannot use functions such as
copying without keying in the department code or user
information. Refer to the MFP Management Guide for the
department and user management.
18.
[CLEAR] button
Use this button to correct the numbers keyed in, such as
the number of copy sets.
19.
Digital keys
Use these keys to enter any numbers such as the number
of copies, telephone numbers or passwords.
20.
[COUNTER] button
Use this button to display the counter.
Description of Each Component
21.
[INTERRUPT] button
Use this button to interrupt print processing and perform
a copy job. The interrupted job is resumed by your
pressing this button again.
22.
[USER FUNCTIONS] button
Use this button for paper size or media type setting of
drawers, and registration of the copy, scan and FAX
settings including a default setting change. Refer to the
MFP Management Guide for the functions enabled by
this button.
23.
Touch panel
Use this panel for the various settings of the copying,
scanning and Fax functions. This panel also indicates the
status of the equipment, such as when you run out of
paper or there is a paper jam.
1
2
3
4
5
7