Jcu Power Menu; Power Menu; Assign Jcu; Jcu Stndby - FLIR MD-Series Operator's Manual

Optional Joystick Control Unit (JCU)

JCU Power Menu

The JCU is more sophisticated than many joystick devices; in fact it has its own
microprocessor and is capable of communicating with other IP devices on a
network. To aid in the control of the system, the JCU has an LCD display that
shows JCU messages, menu options, and general status information. The
various JCU functions are accessed from a set of menus, with each menu entry
selectable in the JCU display.
When the camera is powered on, pressing and holding the Power/DIM button
causes the JCU to display the Power Menu. Use the JCU puck to scroll up and
down within the menus (push forward and back or twist), and select an entry by
pushing in (clicking) the puck or pushing it to the right or left. When the JCU is in
the Power Menu mode, the other JCU buttons such as HOME, COLOR, SCENE,
and USER are disabled.
In the JCU display, a down arrow (v) indicates it is possible to access additional
menu choices by moving the puck down or by rotating the puck clockwise. An up
arrow (^) indicates the last menu entry is displayed, and the other choices must
be accessed by moving the puck up or by rotating the puck counterclockwise. A
double arrow indicates it is possible to move up or down in the menu.
The Power Menu displays the following menu options:

Power Menu

Power Menu displays when you enter the menu. Use the puck to scroll down
through the other menu options. To exit the Power Menu, scroll down to the
Cancel entry and push the puck.

Assign JCU

Use the Assign JCU function to assign a JCU to a camera. When the Assign
JCU entry is selected, the display prompts the user with v Select Camera.
This indicates it is possible to scroll down with the puck to select a camera to
control. When the ID of the camera you want to use displays, press the puck to
select it. The camera ID will blink momentarily to indicate it has been selected.

JCU Stndby

When the JCU Stndby option is selected, the display momentarily shows
Goodbye and then the backlit controls and the display are turned off. The JCU
46
432-0010-00-10 Rev 100 — MD-Series Operator's Manual
Power Menu
Assign JCU
JCU Stndby
Camera Stndby
System Stndby
Global Stndby
Calibrate JCU
Cancel