Clear Log; Scanner Tests; Asic Test; Feed Test - Lexmark X203n Servise Manual

•
Detailed printer information, including code versions
•
Time and date stamps
•
Page counts for most errors
•
Additional debug information in some cases
The printed event log can be faxed to your next level of support for verification or diagnosis.
To print the event log:
1.
Select EVENT LOG from DIAGNOSTICS, and press Select (
2.
Select Print Log, and press Select (
press Back (

Clear Log

Use Clear Log to remove the current information in the Event Log. This affects both the viewed log and the
printed log information.
1.
Select Clear Log from the Event Log menu, and press Select (
Select YES to clear the Event Log or NO to exit the Clear Log menu. If YES is selected, Deleting EVENT
2.
LOG displays on the screen.
Press Back (

Scanner Tests

ASIC Test

This test initiates a scan of the scanner ASIC's memory.
While this test is executing ASIC Test Running is displayed. When the test is complete, ASIC Test Passed is
displayed if the ASIC memory is ok. ASIC Test Failed is displayed if the test fails. press the Back or Stop
buttons to clear the display message

Feed Test

This test executes a continuous feed test from ADF or flatbed.
Note: Neither test produces printed output, or increments any MPS counters.
After selecting this test, <DISPLAY> is displayed.
Running. Flatbed:xxxx ADF:xxxx is displayed while the feed test is executing. To stop the test, press Back or
Stop.If an error occurs during the test, Feed Test failed Flatbed:xxxx ADF:xxxx is displayed. press Return or
Stop to clear the message.
) to return to EVENT LOG.
)
to return to EVENT LOG.
).
).
7011-2xx / 3xx
).
Diagnostic aids
3-11