Lexmark X203n Servise Manual page 115

3.
Place thumbs on the inside of the respective hinge.
4.
Force the left hinge out of its socket, and relax it above the socket.
5.
Force the right hinge out of its socket, and lift it above the socket.
Warning: Do not pull the fuser link out of the MFP any farther than when the door is fully open. Otherwise, the
link extension may dislodge the cartridge coupler.
6.
Carefully lift the cover free from the printer base frame.
7.
Use your left hand to hold the fuser link (A) at the cover joint while rotating the right side of the cover
slightly away from the MFP to disengage the link.
8.
Remove the front cover.
7011-2xx / 3xx
4-3
Repair information