Edge To Edge; Enable Edge To Edge Copy; Ep Setup; Ep Defaults - Lexmark X203n Servise Manual

Hide thumbs Also See for X203n:
Table of Contents

Advertisement

To move to the next character or digit, press
When you press Select (
If Invalid ID appears, the entry is discarded, and the previous Configuration ID 1 is displayed on the
screen.
If the process is successful, Submitting Selection appears on the display, followed by the current
value for Configuration ID 2.
4.
Repeat the steps for entering the Configuration ID 2, and press Select (
If the Configuration ID 2 is validated, Submitting Selection appears, and a check ( ) appears next to
Printer Setup.
5.
Restart the printer. A POR is not automatically performed.

Edge to Edge

Enable Edge to Edge Copy

This setting is set to either on or off. Off is the default setting.

EP Setup

EP Defaults

This setting is used to restore each printer setting listed in EP SETUP to its factory default value. To restore EP
Defaults:
1.
Select EP Setup from Diag Menu, and press Select (
2.
Select EP Defaults, and press Select (
3.
Select Restore to reset the values to the factory setting's, and select Do Not Restore to exit without
changing the setting's.
To cancel and return to the menus, press Back (

Fuser Temp

This adjustment can be used to help solve some customer problems with paper curl on low-grade papers and
problems with letterheads on some types of media.
The fuser temperature can be adjusted to: Low, Normal, High. The default is Normal.
To restore EP Defaults:
1.
Select EP Setup from Diag Menu, and press Select (
2.
Select Fuser Temp, and press Select (
3.
Select Normal, High, or Low. The default is Normal.

Transfer

The transfer can be adjusted to Low, Medium, or High. The default setting is Medium.

Print contrast

The print contrast can be adjusted to Low, Medium, or High. The default setting is Medium.

Charge Roll

The charge roll can be adjusted to Low, Medium, or High. The default setting is Medium.
or
, and press Select (
) on the last digit, the value will be submitted.
).
).
).
).
).
7011-2xx / 3xx
).
.
)
Diagnostic aids
3-9

Advertisement

Table of Contents
loading

This manual is also suitable for:

X204n

Table of Contents