7
Operating
7.1 Starting up the device
7.2 Main menu
Connect the unit to the power grid to start the operation. After a few seconds, the display
shows a running reset. Then the unit is ready for use.
Press [M] to activate the main menu and to select an operating mode. Use the arrow keys to
change the respectively indicated value. When the display shows the desired value, press [OK].
If you don't press any button for about 1 minute, the unit returns to the previous mode. The
set values are retained even when the device is disconnected from the mains power.
HL-x9 Quad Color Flood9x8W
Operating
21