Xantrex XPower Powerpack 400 Owner's Manual page 41

To connect the
using the jump-start cables:
1. Connect the cables to the Jump-Start Cable Port on the
2. Connect the red positive (+) clip of the cables to the red
3. Connect the black negative (–) clip of the cables to the
WARNING: Sparking and Explosion
Do not remove the cables from the Jump-Start Cable Port
when the positive and negative clamps are connected to the
terminals of the external battery.
To disconnect the cables from an external battery and
from the
1. To disconnect the
2. Remove the cables from the Jump-Start Cable Port.
3. Recharge the
CAUTION
Do not recharge the
battery is connected. The AC charger may be damaged.
975-0057-01-01
XPower Powerpack
left side of the
positive (+) terminal of the external battery.
black negative (–) terminal of the external battery.
XPower
battery when the external battery is discharged or no
longer needed, remove the red positive (+) clip, and then
remove the black negative (–) clip.
XPower Powerpack
after use.
Connecting to an External Battery
XPower Powerpack.
Powerpack:
XPower Powerpack
XPower Powerpack
to an external battery
from the external
as soon as possible
when an external
3-17