Using The Light - Xantrex XPower Powerpack 400 Owner's Manual

Xantrex xpower powerpack 400 owner's guide
Hide thumbs Also See for XPower Powerpack 400:
Table of Contents

Advertisement

Operation
Important:
Powerpack
outlet. If the voltage is less than 120 V AC, it may take more
than 35 hours to fully recharge the
after 35 hours of charging, the green Charging Status light
is still flashing, continue to charge the unit for another 15
hours.
Important:
the battery will discharge over time. Remember to recharge
the battery every three months to keep the
Powerpack
Note
automatically reduces to a maintenance charge mode, and
the
to the AC Charger.

Using the light

The
which will operate for about 30 hours before the unit needs to
be recharged. The ON/OFF switch is located beneath the
light. The light can be adjusted up and down by pushing
against the top or bottom of the rim around the lens.
3-4
The 35 hour charging time for the
assumes that there is 120 V at the AC wall
If you keep the
operational.
: Once fully charged, the charging current
XPower Powerpack
XPower Powerpack
XPower
XPower Powerpack
may be left permanently connected
has a built in incandescent light
XPower
Powerpack. If,
in storage,
XPower
975-0057-01-01

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xpower powerpack 400 plus

Table of Contents