Exhaust Filter Replacement; Agitator Cleaning - Kenmore 1!6O31040 Use And Care Manual

I EXHAUST FILTER REPLACEMENT I
The HEPA exhaust filler must be replaced 3o Place new filter cartridge into cover
when dirty. It should be replaced making sure that airflow arrow on side of
regularly depending on use conditions, cartridge points into cover.
The filler CANNOT be washed as tt will Place foam seal of filler against ihe
lose its dust trapping abililyo
Note: See PARTS AND FEATURES
for the exhaust filter number_
1_
Remove
exhaust filter
cover by
pressing the
release tab on
the cover and
rotating out
from vacuum
cieaner.
2o Remove
the filter
cartridge
from cover-
-Filler
Cover
Release
Tab
vacuum cleaner body_
Exhaust
Filter
Sea! Against
Vacuum Cleaner
_--Exhaust
Filler
4. Replace the exhaust filter cover by
placing bottom tabs in slots and rotating
in until cover snaps into placer
I AGITATOR CLEANING
To maintain efficient cleaning, the agita-
tor must be kept free of carpet fiber,
string, or hair build*upo After every 7 to
10 uses, unplug and turn vacuum cleaner
over and check agitator for fiber and
hair build-up.
Use scissors to remove any build-up
entangled around the agitator_
2t