Table of Contents
Advertisement
INSTALLING LOGS AND ROCK WOOL (EMBER MATERIAL) IN FIREBOx
1. Carefully remove logs from wrapping.
2. Remove glass frame. See Glass Frame Removal, page 35.
3. Break rock wool into dime-sized pieces. Cover rear burner completely with rock wool. On front burner, only cover the
ports. Do not exceed 1/2" depth of coverage. See Figure 47.
4. Place bottom right log (#3) on two pins against right side of firebox. See Figure 48.
5. Place rear log (#1) on two pins against back side of firebox. See Figure 49.
6. Place bottom left log (#2) on two pins against left side of firebox. See Figure 50.
Rock Wool Covering
Only the Ports in the
Front Burner
Figure 47 - Installing Rock Wool
Rear Log (#1)
Pins
Figure 49 - Installing Rear Log (#1)
56D3049
Rock Wool Covering
Entire Back Burner
LOG AND ROCK WOOL INSTALLATION
Bottom Right
Figure 48 - Installing Bottom Right Log (#3)
Bottom Left
Log (#2)
Pins
Figure 50 - Installing Bottom Left Log (#6)
Log (#3)
Pins
Continued
37
Advertisement
Table of Contents
