Getting Ready To Sew; Connecting Machine To Power Supply; For Your Safety; Operating Instructions - Kenmore 385.15516 Owner's Manual

SECTION II. GETTING READY TO SEW
Connecting Machine to Power Supply
Power supply plug
Power switch
(_ Outlet
(_ Machine socket
@ Machine plug
@ Light bulb
Before connecting the power cord, make sure the voltage
and frequency shown on the machine conform to your
electrical power.
1. Turn off the power switch _.
2. Insert the machine plug@ into the machine socket (_.
3. Insert the power supply plug _t_into the outlet _).
4. Turn the power switch _to turn on the power and
sewing light _).
For Your
Safety
* While in operation, always keep your eyes on the sewing
area. Do not touch any moving parts such as the thread
take-up lever, handwheel or needle.
* Always turn off the power switch and unplug from the
power supply:
- When leaving the machine unattended.
- When attaching or removing any parts.
- When cleaning the machine.
* Do not place anything on the foot control, when not
sewing.
S
Operating
Instructions:
"For appliances with a polarized plug (one blade wider than
the other). To reduce the risk of electric shock, this plug is
intended to fit in a polarized outlet only one way.
If it does not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician to install the
power outlet. Do not modify the plug in any way."
"Foot Controller Model YC-482J-1 or TJC-150 is used with
Sewing Machine Model 385.15516XXX."
XXX - represents numbers 000 through 999.
S
Controlling Sewing Speed
Sewing speed can be varied by the foot control.
The harder you press on the foot control, the faster the
machine runs.
S
6