Buttonhole; Automatic Buttonhole; Preparation For Sewing; To Sew - Kenmore 385.15516 Owner's Manual

SECTION VII. BUTTONHOLE
Automatic Buttonhole
Stitch selector:
Stitch length:
(_ Needle thread tension:
(_ Presser foot:
l (BH)
Blue zone
2to6
Automatic buttonhole foot
• Preparation for sewing
_t) Groove
Pin
Attach the automatic buttonhole foot. Make sure the
groove on the holder catches the pin on the foot when
lowering the presser foot.
• To sew
_t_ Button holder
(_ Buttonhole lever
The buttonhole size is automatically set by placing the
button in the rear of the automatic buttonhole foot.
The button holder on the foot takes a button up to 1.0"
(2.5 cm) in diameter.
Make a test buttonhole on an extra piece of the fabric to
check your settings.
Use interfacing on stretch fabrics.
Pull the button holder _l)to the back, and place the button
in it. Push it together tightly on the button.
Pull the buttonhole lever _)down as far as it will go.
/-
/-
/-
n
PA'I-rERN LENGTH
®
\
J
J
J
62