Close The Washer Door And Press The Start/Stop Button; Once The Program Has Finished - Asko W6424W Operating Instructions Manual

Operating instructions
NOTE!
Remember to press the Start/Stop button to start
the program.
NOTE!
Make sure the detergent compartment is
completely dry before you add detergent,
otherwise there is a risk that the detergent will
clump before the machine starts.
7
Close the washer door and
press the Start/Stop button
Time remaining
When the program starts, an estimated program
time, in hours and minutes, is displayed. The
remaining time is updated three times during
the program, based on the actual load and the
incoming water temperature. The first update
takes place after about 15 minutes. The remaining
time is last updated just before the final rinse.
To add or remove laundry after the
program starts
If you want to add or remove items after the
program has started, you can stop the program
by pressing and holding the Door Opening button
(key symbol) for three seconds. The program
time flashes on the display. When you restart the
machine, add any extra detergent needed and
close the washer door. The machine continues
automatically from the point where the program
was interrupted.
20
Stopping or changing a program
You can stop a program by pressing the Start/
Stop button for three seconds. To restart the
machine, select a new program, add any extra
detergent needed, and press the Start/Stop
button.
NOTE!
Do not open the detergent compartment while
the machine is running.
8
Once the program has
finished
The text "End" is shown on the display for
2 minutes. The machine then turns off.
The washer door opens automatically once the
program has finished. If you want to deactivate
the Automatic Door Opening function, see the
"Selecting settings" section.
• Remove the laundry.
If you have small children or pets at home, close
the washer door once you have removed the
laundry.
Customer Care Center
1-800-898-1879
www.askona.com