Close The Washer Door And Press The Start/Stop Button; Once The Program Has Finished - Asko WMC64P Operating Instructions Manual

Washing
6
Close the washer door and
press the Start/Stop button
Time remaining
'Program started' is shown on the display.
To add or remove washing after the
program starts
If you want to add or remove items after the
program has started, you can stop the program
by pressing and holding the Door opening button
(key symbol) for three seconds. When you restart
the machine, add any extra detergent needed and
close the washer door. The machine continues
automatically from the point where the program
was interrupted.
Stopping or changing a program
You can stop a program by pressing the
Start/Stop button for three seconds. "Stop"
appears in the display. To restart the machine,
select a new program, add any extra detergent
needed and press the Start/Stop button.
NOTE!
Do not open the detergent compartment while
the machine is running.
7

Once the program has finished

Once a program has finished, "Done"
appears on the display.
The washer door opens automatically once the
program has finished. If you want to deactivate
the automatic door opening function, see the
"Selecting settings" section.
• Remove the load.
• Turn off the main power switch, this will save
energy.
If you have small children or pets at home, close
the washer door once you have removed the
laundry.
Backlighting
Two minutes after the wash program finishes the
display backlighting enters energy saving mode.
13