Close The Washer Door And Press The Start/Stop Button; Once The Program Has Finished - Asko W6564 Operating Instructions Manual

Washing
7
Close the washer door and
press the Start/Stop button
Time remaining
The time remaining is shown in hours and
minutes. Once a program is selected, the
estimated program time is displayed. This may
differ from time to time depending on the
temperature of the water entering the machine
and the size of the load. If the program time is
longer than the previous wash with the same
program, '0:01' will be displayed until the program
finishes. This is normal! The next time you use
the program under similar conditions, the
estimated program time will be more accurate.
To add or remove washing after the
program starts
If you want to add or remove items after the
program has started, you can stop the program
by pressing and holding the Door opening button
(key symbol) for three seconds. The program time
flashes on the display. When you restart the
machine, add any extra detergent needed and
close the washer door. The machine continues
automatically from the point where the program
was interrupted.
Stopping or changing a program
You can stop a program by pressing the
Start/Stop button for three seconds. To restart the
machine, select a new program, add any extra
detergent needed and press the Start/Stop button.
Note!
Do not open the detergent compartment while
the machine is running.
8

Once the program has finished

Once the program has finished, "End"
appears in the display.
The washer door opens automatically once the
program has finished. If you want to deactivate
the automatic door opening function, see the
"Selecting settings" section.
• Remove the load.
• Turn off the main power switch, this will
save energy.
If you have small children or pets at home, close
the washer door once you have removed the
laundry.
Backlighting
Two minutes after the wash program finishes the
display backlighting enters energy saving mode.
17