Asko W6424 Installation Instructions Manual

Domestic

Hide thumbs Also See for W6424:

Table of Contents

Download this manual

Dear Customer,

Read these instructions carefully and completely before you install the

machine. The installation should be carried out by a qualiﬁ ed person who

is familiar with all local codes and ordinances for electrical and plumbing

connections. See also the general Safety Instructions in the Use & Care

Guide.

Cosmetic damage must be reported to the ASKO dealer within ﬁ ve

days from the date of purchase. As soon as you unpack the machine,

thoroughly check it for cosmetic damage.

Installation Instructions for Washing Machine

DOMESTIC

Table of Contents

Need help?

Do you have a question about the W6424 and is the answer not in the manual?

Page 1 See also the general Safety Instructions in the Use & Care Guide. Cosmetic damage must be reported to the ASKO dealer within ﬁ ve days from the date of purchase. As soon as you unpack the machine, thoroughly check it for cosmetic damage.
Page 2 Connection to water supply Water supply connection Hot water connection (depending on model) Since ASKO washers have a built-in heating A few seconds after you start a program, the element, you only need a cold water inlet. The washing machine will begin to ﬁ ll with water from connection should be made by someone who the hot and cold supplies.
Page 3 Dryer, which is equipped with a matching receptacle. The plug supplied with the washer WARNING! can only be used with an ASKO Dryer. If the washer is used separately or with another dryer, Improper connection of the equipment- it must be on a separate 208-240 V single- grounding conductor can result in a risk of phase circuit.
Page 4 Stacked installation ASKO washers should never be stacked on a counter or a dryer. You can, however, stack an ASKO dryer on an ASKO washer. Refer to your Dryer Use and Care Guide for instructions on how to do this.
Page 8 www.askona.com We reserve the right to make changes. WM70.1 en (05-17)