Using The Battery Pack - LENCO DVP-70 Owner's Manual

Using the Battery Pack

Installing the battery pack
Align and insert the battery pack into the
corresponding slots on the back of the unit.
Removing the battery pack
Charging the battery pack
1.Turn off the unit by sliding POWER ON/OFF to OFF.
Note: When the player is turned on, the battery will not be charged.
2.Attach the battery pack to the unit.
3.Connect one end of the AC cord to the jack on the AC adaptor.
4.Plug the other end of the AC cord into an AC outlet.
5.Connect the DC cord to the DC IN 12V jack on the DVD player.
Slide down the latch.
Slide the battery pack to the left until it clicks into place.
Slide the battery pack to the right, and remove.
OPEN
1.The LED lights ( orange color ), and charging begins.
2.When battery is fully charged, the LED turns to red.
10