Turning on the system power
E 2007 Nordson Corporation
WARNING: Allow only qualified personnel to perform the following tasks.
Follow the safety instructions in this document and all other related
documentation.
Check:
The Emergency Stop Button is in the off (out) position. (To check twist
S
clockwise).
The lamp hood assembly is correctly in place.
S
The 'lamp switch'
S
The main 'System Isolator' switch can now be turned on.
Press and hold the 'mains on'
S
Turn the isolator handle in a clockwise direction to the on position.
S
Release the 'Mains On' indicator.
S
The following indicators should now be illuminated:
Mains On
Test
No Airflow
Conveyor Stop
MiniCure 08-07
Operation
is in the off (out) position.
indicator on the control panel.
Main Control Panel
Next to System Isolator
Main Control Panel
Main Control Panel
5-1
Operation
Section 5
Part 7119745C